DL-6CHL-RQ10 adalah mesin pengering teh jenis kecil, boleh mengeringkan semua jenis teh, menggunakan pemanasan gas, kapasiti dari 60kg hingga 400kg sejam, suhu dan kelajuan boleh laras, keselamatan, penjimatan tenaga dan perlindungan alam sekitar
DL-6CHZ-9QB ialah penyahhidrat teh keluli tahan karat penuh, pemanas elektrik, kawasan pengeringan kira-kira 10 meter persegi, kapasiti 27-45 kg setiap kelompok.
DL-6CHZ-5 menggunakan pemanas elektrik, bahagian luar sedang membakar cat di dalam dulang keluli tahan karat, kawasan pengeringan 5 meter persegi, kapasiti 15-25kg setiap kelompok.
DL-6CRT-65T boleh memproses hampir semua jenis teh, jenis loyang, bahagian yang dihubungi dengan teh diperbuat daripada keluli tahan karat, diameter dram 65cm, ketinggian 48cm, kapasiti kira-kira 60 kg setiap kelompok.
Pemisah skrin bergetar bulat terutamanya untuk menyusun saiz habuk/serbuk/serpihan teh yang berbeza, digunakan untuk teh CTC atau daun teh hancur lain, Skrin berbeza pilihan untuk mendapatkan saiz teh yang berbeza.
100kg daun segar memproses 25kg teh oolong siap dalam 12 jam, Halaman ini mengesyorkan anda satu set lengkap peralatan pengeluaran teh hijau dan kaedah penggunaan.
Kilang batu matcha diperbuat daripada granit yang dipotong menjadi satu bahagian. Selepas proses pengisaran awal, tiada serbuk batu atau sanga yang hilang semasa penggunaan, yang memastikan keselamatan dan kebersihan teh matcha.
Fungsi utama sangkar pembakar dram buluh elektrik adalah untuk menggantikan sangkar penaik karbon, menjadikan pengeringan teh lebih tepat dan terkawal.
DL-4C-T50A5 is hand-held type leaf plucking machine, with HUASHENG 1E34F 2 stroke engine, cutting width 50/60cm, 1 hour can pluck 500-600kg fresh tea leaf.
DESCRIPTION |
The Handheld Tea Leaf Harvesting Machine is mainly used for tea picking in mountain, hilly, plain and other terrain. It is produced with international advanced technology. It has the advantages of low noise, large air volume, stable quality and high production efficiency. It is an ideal machine for tea picking.
4C-T50A5 Gasoline Tea Harvesting Machine is handheld type, using our own engine NATIKA 2 stroke, 24.4 CC, 0.7KW gasoline engine, output power is larger than 4 stroke, please note that the ratio of engine oil to gasoline is 25:1. The performance is more stable, and the high temperature does not extinguish. Tea picking is more efficient and efficiency is 40 times that of manual labor.
ADVANTAGE |
SK5 carbon tool steel has been quenched with high hardness and strong wear resistance. It can cut 1 cm thick branch directly.
The structure of the blowpipe is optimized. The air volume of each duct is uniform and the wind is more stronger, tea leaf into tea bags faster.
Two Stroke Tea Harvesting Machine after 20 years of continuous optimization and improvement, now all parts are produced by ourselves, we ensure that every part is of the best quality, and the service life is increased by 100% compared with peers!
Custom widened and thickened shoulder strap. The width of the strap is widened by 30% and the thickness is increased by 20%. The back board is natural against the waist and conforms to ergonomics, the shoulder and waist will not ache during use.
DETAILS |
Ergonomic handle design, reasonable balance weight of knife rest, more labor-saving tea picking
Independently designed fan blade and fan cover, plastic fan and aluminum fan are available for higher strength and more sufficient air volume
Since eight years ago, we were not satisfied with using gearbox accessories of the same poor quality as other peers. We spent hundreds of thousands of dollars to build our own gearbox components, which increased the life of the machine by 100%
Two Stroke Tea Harvesting Machine after 20 years of continuous optimization and improvement, now all parts are produced by ourselves, we ensure that every part is of the best quality, and the service life is increased by 100% compared with peers!
SPECIFICATION |
Handheld Gasoline Tea Plucking Machine specification list:
Model | DL-4C-T50A5 |
Cutting Width | 40/50/60 cm |
Engine Model | NATIKA 1E34F |
Stroke | 2 Stroke |
Displacement | 25.4 CC |
HP | 0.9HP |
Power | 0.7 KW |
Total weight | 9.2kg |
Specification of all of Handled Gasoline Tea Harvester Machine.
Model | Engine | Stroke | Power |
DL-4C-T50A5 | NATIKA 1E34F | 2 Stroke | 0.75 KW |
DL-4C-H2 | HONDA GX25 | 4 Stroke | 0.81 KW |
If you have special need, it can be customized according to the needs of customers.
PHOTOS |
CONTACT |
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓